It is used after iron phosphate, zinc phosphate or zirconium coating baths in order to increase the adhesion strength and corrosion resistance of the paint before electrostatic powder coating. It is a liquid form product.
After zinc phosphating, it is a product used to prepare steel wire or drawn steel pipe and to prevent rust until drawing. Dry wire drawing machines are capable of carrying dry soap. It provides easy shooting. High alkaline structure and easy to use.
It is used to clean oil and phosphate layer on phosphated bolts and salmon in heat treatment lines. It can be applied by dipping and spraying methods. It holds the oil in it, it has a long life. It is used between 5% and 150C. The temperature should be between 75-900.
It is used as final treatment bath in order to neutralize iron and steel surfaces after acid baths in enamel coating lines. It is a high alkali product, its use and control is very simple.
It is used to remove the phosphate layer on the surface of steel parts in heat treatment lines. It is a liquid material. It is easy to mix and its application and control is simple. Used between 5 -150%. It is a very effective product for phosphate removal. It is in a form of powder…
It is used to prepare aluminum parts for electrostatic powder coating process. The aluminum surface needs to be degreased and cauterised(1g / m2). The coating bath without chrome plating should be installed with deionized water. Deionized water should be used in the rinse bath prior to coating. After coating, the aluminum parts are taken into…
Yellow chromate coating should be done by immersion method before electrostatic powder coating process of aluminum parts. 2-2.5% of the oil is treated for 1-5 minutes. Coating color from light yellow to brown. Paint manufacturer maximum corrosion manufacturer. Aluminum profile systems or aluminum door handle, modernized electrostatic paint can be preferred.
It is used to prevent the vapor from hydrochloric acid and sulfuric acid baths.
It is an organic product used for cleaning of steel, iron and cast parts from rust, tufal and impurities. It does not wash out metal much, does not emit any odors. Bathroom installation is recommended at 50% by weight.
It works at ambient temperature before the application of powder and wet paints and with its special chemical formula, it allows metal and dye to stick together in a compact and homogeneous way. It is one of the latest technology products preferred due to its high corrosion resistance and low operating costs. It can work…