Phoric Ir (Wire Drawing Zinc Phosphate)

It is used to coat zinc phosphate prior to drawing of wires to be used for bolt construction. Due to its high phosphate coating weight, it is manufactured for bolt manufacturers. The PHORIC AK 1 (Activation chemical) must be used before. It is a product without accelerator, it can be continued with mud cleaning. The…

Phoric Zinc 4 (Wire Drawing Zinc Phosphate)

It is used for zinc phosphate coating of the wires before cold drawing and forming. Especially produced for rope manufacturers. It provides 7-10 g / m2 coating weight, the temperature is 70-85C degree, the processing time is 5-6 minutes. PHORIC AK 1 (activation chemical) should be used before. Atun Kimya’s lubricants or soaps are recommended…

Phoric 5 (Wire Drawing Zinc Phosphate)

It is a two-component product used before cold drawing and forming of wires. Used with accelerator. Coating weight  is 7-9 g / m2. Produced for steel rope, pre-stressed concrete steel, spring wire, bolt manufacturers. Atun Kimya’s lubricants or soaps are recommended by us in order to increase wire drawing speed or to provide good corrosion…

PS 10 (Solvent Paint Remover)

It is a solvent based 100% concentration product. It dissolves the paint by melting and makes the paint to dissolve to the bottom of the bath without damaging the metal surfaces. It is recommended to use in plastic containers. Covering the bathroom significantly reduces the fly of the product. It is especially used in paint…

Phoric H 6 K (Thick Zinc Phosphate)

The Phoric H 6 K product is used to form a thick zinc phosphate layer of 15-40 g / m2. Generally, protective oil or lubricants are preferred in order to prevent corrosion after zinc phosphate and to prevent rusting. This product is used by automotive parts manufacturers who produce products such as bolts, rods. It…

PS 30 (Paint Remover)

PS 30, electrostatic powder paint, wet paint and cataphoresis paint reaches the steel from the bottom, removing the surface of the paper as paper separates. The concentration of the product is 100%. By separating the paint residues from the surface with the help of the filter and closing the bath you use will extend the…

Phoric Zdn (Immersion Zinc Phosphate)

It is a zinc phosphate product which is applied to increase the corrosion resistance of iron and steel parts in electrostatic powder coating applications. Single component, provides 2-5 g / m2 coating, working temperature 60-70 ° C degree, processing time should be between 5-10 minutes. There is no need to use activation. Creates a homogeneous…

Clemet Ci (Gas Breaker And Corrosion Inhibitor)

It is produced for use in hydrochloric acid baths. It prevents the damage of steel during the cleaning of steel, iron and cast parts at acid baths up to 80-90%. In particular, it prevents the parts such as bolts from being exposed to the hydrogen embrittlement problem. It forms a light foam layer on the…

Phoric Ca (Dip Zinc Phosphate)

It is a product with 2-5g / m2 phosphate coating weight which is used before the bonding operations of iron and steel parts with electrostatic powder coating and rubber. It makes a homogeneous and compact coating, so no activation bath is required. A long bath life is achieved with the accelerator. High corrosion resistance is…