It is a product that can be applied as a dipping, hand wiping or spray to remove the oil, rust and descale layer on iron and steel materials. It can be used by mixing with water at a concentration of 10-40%.
It is an acidic product which is used by dipping method for removing rust that is formed on iron and steel materials. Inhibitors that are contained in the metal prevent corrosion. It should be used by mixing between 10% and 40% water according to the density of rust and descale layer.
It is used in grinding machines to prevent the steel parts from overheating, to make them slippery and to increase the processing speed. It prevents rust after processing and provides maximum corrosion resistance. It is used in% 1- 3 ratio. It is water based, does not produce bacteria and does not smell. Hydrochloric acid is…
It is used in grinding machines to prevent the steel parts from overheating, to make them slippery and to increase the processing speed. Provides maximum corrosion resistance after the process.
It is a product used to clean the oil on iron and steel surfaces. It is used between 5-15%. It does not abrade much steel due to the inhibitors it contains. The hydrochloric acid or sulfuric acid may then be added to the treatment baths. Bathroom control is simple.
It is a chemical in liquid form which is used for the cleaning of weld marks on stainless parts by dipping method. It does not harm the stainless surface, it only cleans the traces in the welded areas.
Used for degreasing and polishing aluminum parts. It is applied by mixing with 2-5% water.
It is used to clean all metals from oil and burr. It is mainly used for cleaning oil and surface impurities in metals such as copper prior to welding. Thus, the parts will be suitable for welding.
Copper, steel, aluminum, zamak is used for the removal of metals such as oil and burr. No rinsing and drying required. It is generally preferred before electrostatic powder coating, wet paint and welding processes.
It is generally preferred in degreasing operations of parts such as pots, pans or aluminum profiles that are processed in aluminum presses. Also suitable for copper and zinc. The bath is installed at a concentration of 3-5% by weight, the processing time is 5-10 minutes, the temperature 60 – 80 ° C will be sufficient…