It is used to clean oil and sliders on metal surfaces such as iron, steel, aluminum. It can be applied by dipping, spray and ultrasonic methods. Degreasing products are divided into three groups as acidic, alkali and neutral.
PHORIC H (Hand Wipe Iron Phosphate)
It is used for iron, steel, aluminum and galvanized parts and also for iron phosphate coating. The product is mixed with water at a rate of 10% and is applied by wiping with an absorbent body such as a sponge or cloth. Then rinse and drying should be done. Steel door, shelf and panel industry intensively prefer this product. It is an alternative to spray or dipping methods due to its low investment cost and easy usage.
Clemet 250 (Alkaline Degreasing Product)
It is used to clean the oil layer on the surface after shaping operations of steel and iron parts. Powder is a high alkaline product. It is generally used for cleaning of iron and steel surfaces before going to the coating. The bath is installed in a concentration of 3-5% by weight. The processing time is 5-10 minutes, the temperature will be sufficient for 60-80 ° C surface cleaning.
Clemet R 11 (Spray and Dipping Oil)
It is a medium alkaline product which is generally preferred in rectifying operations. Can be used as dipping and spraying. It is suitable for iron, steel, zinc and aluminum surfaces. After cleaning, a corrosion-resistant layer will form on the surface and will temporarily protect against corrosion. The bath is installed at a concentration of 3-5% by weight, the processing time is 5-10 minutes, the temperature 60 - 80 ° C will be sufficient for surface cleaning. If the rate of dirt is high, the temperature, duration or concentration should be increased.
Clemet US 7 (Ultrasonic Lubrication)
It is the preferred neutral degreasing product for the cleaning of steel, iron, aluminum, zamak, copper, gold and galvanized surfaces after metal processing operations. It can be used in ultrasonic degreasing machines and can be used as dipping. The bath is installed at a concentration of 3-5% by weight, the processing time is 5-10 minutes, the temperature 60 - 80 ° C will be sufficient for surface cleaning.
Clemet AL 14 (Alkaline Degreasing)
It is generally preferred in degreasing operations of parts such as pots, pans or aluminum profiles that are processed in aluminum presses. Also suitable for copper and zinc. The bath is installed at a concentration of 3-5% by weight, the processing time is 5-10 minutes, the temperature 60 - 80 ° C will be sufficient for surface cleaning.
Clemet ME 1 (Solvent Degreasing)
Copper, steel, aluminum, zamak is used for the removal of metals such as oil and burr. No rinsing and drying required. It is generally preferred before electrostatic powder coating, wet paint and welding processes.
Clemet ME 2 (Solvent Degreasing)
It is used to clean all metals from oil and burr. It is mainly used for cleaning oil and surface impurities in metals such as copper prior to welding. Thus, the parts will be suitable for welding.
Clemet AB (Alumiumnyum Degreasing and Polishing)
Used for degreasing and polishing aluminum parts. It is applied by mixing with 2-5% water.
Clemet ST 04 (Stainless Degreasing and Cleaning Weld Stains)
It is a chemical in liquid form which is used for the cleaning of weld marks on stainless parts by dipping method. It does not harm the stainless surface, it only cleans the traces in the welded areas.
Clemet Emal 1 (Acidic Degreasing)
It is a product used to clean the oil on iron and steel surfaces. It is used between 5-15%. It does not abrade much steel due to the inhibitors it contains. The hydrochloric acid or sulfuric acid may then be added to the treatment baths. Bathroom control is simple.